solaredge cell modem
People also ask
How do I connect the CCG to the SolarEdge monitoring server?
An Ethernet cable is used to connect the CCG to the SolarEdge monitoring server. Inverter, optimizer and meter monitoring data is sent to the SolarEdge monitoring server via the LAN port using the SolarEdge protocol, and inverter monitoring data is sent to the non-SolarEdge logger via the second RS485 port using the SunSpec protocol.
How does the SolarEdge plug-in work?
The plug-in is installed inside the SolarEdge inverter and connected to an external antenna (included in the package), simplifying the communication setup and saving installation time. View a detailed coverage map. If playback doesn’t begin shortly, try restarting your device.
What is high bandwidth mode in SolarEdge sever?
Figure 18: High bandwidth mode, multiple devices, RS485 bus, cellular modem connection In this mode data is sent to SolarEdge sever continuously. Description With this configuration you can connect multiple devices on the same RS485 bus in master/slave configuration.
What are the system requirements for the SolarEdge device?
To use the cellular communication option, the communication board must include a designated modem connector and its SolarEdge device CPU version must be 3.1600 or higher. To use a SolarEdge data plan, the SolarEdge device CPU version must be 3.1800 or higher.