How to install a solar panel | Solar panel wholesaler

How to install a solar panel

Over a million homes in the US have already gone solar, and many more are considering it. If you’re considering solar, you’re probably curious about what happens during a solar panel installation or even how to do it yourself. After you sign your solar contract, there are seven major steps that must occur before the solar panels on your roof can actually power your home, and the majority of them are behind the scenes. To demonstrate what to expect, we’ve outlined a straightforward seven-step process for a typical solar installation.

How to Install Solar Panels

Follow the following steps during the installation.

Step 1: Find the Best Location

  • First, assess your land to determine the ideal location for the panels.
  • Never assume that a sunny place on your roof or property is the finest. The roof’s pitch and orientation affect solar module efficiency.
  • So choose a site where the panels will get the most sun exposure throughout the day.

Step 2: Build the Platform

  • Step two is to prepare the area for the modules. The platform can be made of metal or aluminum rails.
  • Plan the mounting system around the panel’s dimensions. Make it sturdy enough to resist harsh weather.
  • Building a platform necessitates running conduits from the installation location to the house where the power is processed.

Step 3: Mount the Panels

  • Brackets, bolts, or clamps are used to secure the panels to the platform.
  • The accessories’ purpose is to secure the modules to the platform.
  • Take care to avoid accidents and damage when mounting panels on the roof.

 

Step 4: Wiring

You’ll need junction connections or a fuse combiner box to connect the solar modules. Maintain proper cable insulation to avoid power leaks and mishaps. After that, connect the exterior wiring to the interior panel.

The disconnect will allow electricity to flow to a charge controller and battery bank. It can also flow to an inverter from the disconnect. The charge controller or the inverter receives power first, depending on the solar power system.

Wiring is critical. That’s why you shouldn’t install solar panels unless you’re qualified. Hire specialists with competence in wiring to avoid injury or system damage.

Step 5: Ground the Panels and the Mounting System

Installing solar panels requires earthing the panels and mounting hardware. It will:

  • Prevent catastrophic electric shocks to you and others
  • Protect against system-caused fires
  • Protect solar components from lightning to avoid power surges.

That’s why you need to place grounding rods six inches above the ground.

Because the mounting system is metal, it should be earthed. If no earthing network exists, the control panel within the house must be grounded.

Step 6: Connect the Electrical Components

The last step is to properly connect the electrical components. Due to the fact that the wiring, which is specified by the type of solar system, is already in place, fitting the pieces should be straightforward.

If the system has a battery backup, the component count will be quite high. In this scenario, verify that the panels, charge controller, battery, and inverter are all connected properly. After that, you can transfer the power from the inverter to the house’s main electrical control panel.

Step 7: The Test Run

Everything should be double-checked prior to initiating a test run. The test run is used to confirm that everything is working properly. When the installation is complete, it’s time to close the book and begin experiencing the benefits of solar photovoltaic energy.

Final Words

If you don’t have a solar system in place, it is time to invest in one and learn how to install some basic solar panels

Related news

TOP