People also ask
Where is the Enphase M215 microinverter located?
Enphase M215 Microinverter M215 Installation and Operation 餂?20143 Enphase Energy Inc. All rights reserved. 141-00012 Rev 06 Contact Information Enphase Energy Inc. 1420 N. McDowell Blvd. Petaluma, CA 94954
Does the Enphase m215-60-2ll require a GEC?
The M215-60-2LL does require a GEC or other compliant ground method. Balanced 208 VAC (three-phase) is accomplished by alternating phases between microinverters as shown: M215 Installation and Operation 餂?201422 Enphase Energy Inc. All rights reserved. 141-00012 Rev 06 Step 11: Complete the Installation Map
How do the Enphase microinverters communicate with the envoy?
The Enphase Microinverters begin communicating over the power lines to the Envoy. The time required for the Envoy to discover all of the microinverters varies with the number of microinverters in the system and quality of the power line communications.
What is the Enphase installation map?
The Enphase Installation Map is a diagrammatic representation of the physical location of each microinverter in your PV installation. You will create the virtual array in Enlighten from this map. Use the blank map on page